My Dream
ONE THIRD OF THE EARTH BECKONS. Whether it's the 2008 H2 SUV or H2 Sports Utility Truck (SUT), owning a HUMMER affords you the ultimate freedom to go just about anywhere and do just about anything. Featuring a luxurious new interior and a more powerful 6.2L V8 engine, the H2 strikes the perfect balance between off-road comfort and on-road capability
New, more powerful 6.2L V8 engine and 6-speed Hydra-Matic automatic transmission
2-speed electronically controlled, full-time 4WD and state-of-the-art traction control system (TCS)
All-new, redesigned, luxury interior featuring premium, fine leather-appointed seating, a new instrument panel, new door trim levels, new DVD system and more
Immensely strong frame and robust suspension system with full undercarriage protection and rocker panels
Panic Brake Assist optimizes braking pressure in emergency situations
About me
I am a Linux Administrator enjoy myself when on work as I learn new things daily. Learning new technologies......
Block IP and IP ranges on Windows server
If you dont have control over a router or firewall you can block IP's at the server via Windows.
Click 'Start' > 'Run' >type 'MMC' press ok.
In the console click > 'File' > 'Add/Remove Snap in'
In the 'Standalone Tab' click The 'add' button
Seclect 'IP Security Policy Managment' > 'ADD' > 'Local Computer' > 'finish' > 'close' > 'ok'
You should now be back to the console.
In the left frame right click 'IP security policies on local computer' > 'Create IP security policy'
Click Next and then name your policy 'Block IP' and type a description.
Click 'Next' then leave 'activate' ticked then click 'Next'
leave the 'edit properties ticked and click 'Finish'
You should now have the properties window open.
Click 'ADD' then click 'Next' to continue.
Leave 'This rule does not specify a tunnel' selected and click 'next'
Leave 'all network connections' selected and click 'next'
You should now be on the IP filter list. You need to create a new filter, so dont select any of the default ones. Click 'ADD'
Type a Name for your list, call it 'IP block list'
Type a description in, can be same as name.
Click 'ADD' then click 'Next' to continue.
In the description box type a description. As its the first IP you are blocking call it 'IP1' or 'IP Range 1'
Leave ticked the 'Mirrored. Match packets with the exact opposite source and destination addresses'
Click 'Next'
The 'Source address' should be left as 'My IP address' click 'Next'
You can now select 'A Specific IP address' or 'A Specific Subnet' for the Destination address.
Type in the IP address you want to block and if blocking a subnet type in the subnet block. Click 'next'
Leave the protocol type as 'Any' and click 'Next' and then 'Finish'
You have now blocked your first IP or IP range.
Click 'Start' > 'Run' >type 'MMC' press ok.
In the console click > 'File' > 'Add/Remove Snap in'
In the 'Standalone Tab' click The 'add' button
Seclect 'IP Security Policy Managment' > 'ADD' > 'Local Computer' > 'finish' > 'close' > 'ok'
You should now be back to the console.
In the left frame right click 'IP security policies on local computer' > 'Create IP security policy'
Click Next and then name your policy 'Block IP' and type a description.
Click 'Next' then leave 'activate' ticked then click 'Next'
leave the 'edit properties ticked and click 'Finish'
You should now have the properties window open.
Click 'ADD' then click 'Next' to continue.
Leave 'This rule does not specify a tunnel' selected and click 'next'
Leave 'all network connections' selected and click 'next'
You should now be on the IP filter list. You need to create a new filter, so dont select any of the default ones. Click 'ADD'
Type a Name for your list, call it 'IP block list'
Type a description in, can be same as name.
Click 'ADD' then click 'Next' to continue.
In the description box type a description. As its the first IP you are blocking call it 'IP1' or 'IP Range 1'
Leave ticked the 'Mirrored. Match packets with the exact opposite source and destination addresses'
Click 'Next'
The 'Source address' should be left as 'My IP address' click 'Next'
You can now select 'A Specific IP address' or 'A Specific Subnet' for the Destination address.
Type in the IP address you want to block and if blocking a subnet type in the subnet block. Click 'next'
Leave the protocol type as 'Any' and click 'Next' and then 'Finish'
You have now blocked your first IP or IP range.
Subscribe to:
Posts (Atom)
